Fuge Fine

Description

For grouting of existing cobble and new Block Paving for joints 3mm. and upwards. Prevents weeds and grass developing. Permanently water permeable. Replaces Silica Sand. For pedestrian and Light Traffic use. Dimensions of joint min 3mm. Depth: 40mm. Processing temperature: min 0 degrees. Application Procedure: 1.Power wash joints min. 40mm. 2.Open bucket and spread Fuge Fine on the wet surface. 3.Rinse the material into joints with soft jets of water helps to fill the joints deeply and without voids. 4.Use a broom and sweep the Fuge Fine diagonally into the joints. 5.Finally spray paving area with a soft jet of water, sweep off any dry/loose material before drying process begins. Warning!! Concrete slabs are only suitable if they have a minimum 3mm from top to bottom . Note: Pre wetting of surface prevents the build up of residue on natural stone or concrete. Colour sand