CORE Edge – Galvanise Edge

16.60

The CORE Edge powered by ECCO guards are made of 1.6mm mild steel and sufficiently strong for lawn mowers and light vehicles. These fexible, steel guards can be quickly installed without special tools. Easy to install in straight lines and curved shapes or bend on-site into corners.
– Easy installation
– Weatherproof
– Strong
Suitable for;
Lawn and border edges, Finishing of paths and terrace, Flower bed or vegetable garden

Installation Guidelines;
1. Prepare the area you would like to install the edging. If the ground is hard, we would advise that you loosen the ground with a flat spade or pickaxe to make the edging easier to install.
2. Once the ground is prepped, begin by placing your first piece of CORE EDGE into the ground, up close to the edge you have formed. Ensure the edging is facing the correct way – with the logo facing outwards.
3. The best way to drive the edging into the ground would be using a block of wood and a hammer/mallet. The block of wood ensures the top of the edging doesn’t get damaged and makes installation safer.
4. Once your first length is in, you can then attach your second length by securing them together using the large connecting tab at the top of each piece of edging.
5. After securing the edging at the top, take a pair of long nose pliers and then bend the locking tabs at the bottom back on themselves to fully secure the two pieces of CORE EDGE together.
6. The finished result will leave a crisp and neat finish to your garden borders. Here is a straight line edge, but the edging can be curved or bent into 90 degree angles for corners

Galvanise 150mm @ €16.60 per l/m

Description

The CORE Edge powered by ECCO guards are made of 1.6mm mild steel and sufficiently strong for lawn mowers and light vehicles. These fexible, steel guards can be quickly installed without special tools. Easy to install in straight lines and curved shapes or bend on-site into corners.
– Easy installation
– Weatherproof
– Strong
Suitable for;
Lawn and border edges, Finishing of paths and terrace, Flower bed or vegetable garden

Installation Guidelines;
1. Prepare the area you would like to install the edging. If the ground is hard, we would advise that you loosen the ground with a flat spade or pickaxe to make the edging easier to install.
2. Once the ground is prepped, begin by placing your first piece of CORE EDGE into the ground, up close to the edge you have formed. Ensure the edging is facing the correct way – with the logo facing outwards.
3. The best way to drive the edging into the ground would be using a block of wood and a hammer/mallet. The block of wood ensures the top of the edging doesn’t get damaged and makes installation safer.
4. Once your first length is in, you can then attach your second length by securing them together using the large connecting tab at the top of each piece of edging.
5. After securing the edging at the top, take a pair of long nose pliers and then bend the locking tabs at the bottom back on themselves to fully secure the two pieces of CORE EDGE together.
6. The finished result will leave a crisp and neat finish to your garden borders. Here is a straight line edge, but the edging can be curved or bent into 90 degree angles for corners

Galvanise 150mm @ €16.60 per l/m

Reviews

There are no reviews yet.

Be the first to review “CORE Edge – Galvanise Edge”

Your email address will not be published. Required fields are marked *